Public Pricelist
Sort By: Price - High to Low
  • Alat Ukur & Instrument
  • Komponen Mekanikal & Hardware
  • Perkakas, Listrik & Pneumatic
MITUTOYO GAUGE BLOCK STEEL 400MM 0 611684-021
Benefit
High Quality Material From Steel/Ceramic with Suffix Number Co ntain Grad e and Standard Include Inspection Certificate

Features
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are not included in th e chart below can be supplie d custom-made on request. Each Grade K gauge block to ISO/DIN/ JIS, BS or
ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was c alibrated by interferometry.

Type : Rectangular Individual Nominal length : 6 MM-10 MM (. 3 INC-.4 INC) +/- 0.00030 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 600MM 0 611840-021
Benefit
High Quality Material From Steel/Ceramic with Suffix Number Co ntain Grad e and Standard Include Inspection Certificate

Features
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are not included in th e chart below can be supplie d custom-made on request. Each Grade K gauge block to ISO/DIN/ JIS, BS or
ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was c alibrated by interferometry.

Type : Rectangular Individual Nominal length : 6 MM-10 MM (. 3 INC-.4 INC) +/- 0.00030 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK SQ STEELL 25MM 0 614635-021
Benefit
High Quality Material From Steel/Ceramic with Suffix NumberCon tain Grade and Standard Include Inspection Certificate

Features
If using only one length repeatedly, it is a good idea to purchasei ndividual gauge blocks. Nominal sizes which are not included inthe chart below can be supplied custom-made on request. Each GradeK ga uge block to ISO/DIN/ JIS, BS or ASME
standard is suppli ed with aCe rtificate of Calibration which certifies that the gauge block wascalib rated by interferometry.

Nominal length: 10.3 MM - 100 MM (.45 INC - 4 INC)
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK SQ STEEL 50MM 0 614675-021
Benefit
High DurabilityEasy To Use

Features
Measurement range is 12 to 20 mm, precise to 0.001 mm, and accurate to + or - 2 micrometers TiN-coated measuring contact points for dura bility and impact resistance Contact point geometry allows the instr ument to measure to the bottom of blind

Style Name:LCD Maximum Measurement:50-75mm Gradient Spacing: 0.001 mm Material Type:Steel Measurement Accuracy:+/-0.003mm Resolution:0.001mm System of Measurement:Metric
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK SQ STEEL 100MM 0 614681-021
Benefit
-

Features
-

-
Not Available For Sale 0.0 IDR
MITUTOYO HOLDER BASE 35MM 619009
Benefit
-

Features
-

-
Not Available For Sale 0.0 IDR
MITUTOYO HOLDER/60,GB F/516A 619002
Benefit
-

Features
-

-
Not Available For Sale 0.0 IDR
MITUTOYO HOLDER/160,GB F/516A 619004
Benefit
Mechanical digit counter for ease of reading to 0.01mm Vernie r scale in metric units with slanted barrel markings to help reducepa rallax errors for taking precise outside diameter (OD)measurements Ratchet-stop mechanism helps provide
uniform pressurefor precise, repe atable measurement Satin chrome finish on thimbleand sleeve help s resist rust and reduce glare Carbide fa cing onspindle and anvil provides wear resistance

Features
High DurabilityEasy To Use

Part Number : 193-901 Style Name : Vernier MaximumMeasure ment : 0-75mm Gradient Spacing : 0.0001 INChes Measurement Accu racy : +/-0.002mm Number of Items : 1 Range :0-75mm Resol ution : 0.0001Inch Size Name : 0-
75mm BrandName : Mitutoyo < li> System of Measurement : Metric Material Type : Carbide Man ufacturer Series Number : Digit Outside Micrometers
Not Available For Sale 0.0 IDR
MITUTOYO CONTRACT FORCE GAGE 0.6-5N 546-119
Benefit
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are n ot included in the chart below can be supplie d custom-made on request.< li>Each Grade K gauge block to ISO/DIN/

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate

Type : Rectangular Individual Nominal length :6 MM-10 MM(. 3 IN C-.4 INC) +/- 0.00016 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO EXTENSION ROD 500MM F/511 953554
Benefit
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are n ot included in the chart below can be supplie d custom-made on request.< li>Each Grade K gauge block to ISO/DIN/

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate

Type : Rectangular Individual Nominal length :6 MM-10 MM(. 3 IN C-.4 INC) +/- 0.00016 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO HOLTEST 4- 5/0.001MM 368-004
Benefit
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are n ot included in the chart below can be supplie d custom-made on request.< li>Each Grade K gauge block to ISO/DIN/

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate

Type : Rectangular Individual Nominal length :6 MM-10 MM(. 3 IN C-.4 INC) +/- 0.00016 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO ANVIL F/ 169 201294
Benefit
can increase the depth range of the bore gage

Features
Extension Rods (optional) are available to assist in deep-hole meas urement. If two or more Extension Rods are connected together, meas urement errors may occur due to exure of the rod assembly.

Range : 1000 MM
Not Available For Sale 0.0 IDR
MITUTOYO DIAL DEPTH GAGE 0-210/0.01MM 7213
Benefit
High Quality Material From Steel/Ceramic with Suffix Number Co ntain Grad e and Standard Include Inspection Certificate

Features
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are not included in th e chart below can be supplie d custom-made on request. Each Grade K gauge block to ISO/DIN/ JIS, BS or
ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was c alibrated by interferometry.

Type : Rectangular Individual Nominal length : 10.3 MM-100 MM ( .45 INC-4 INC) +/- 0.00010 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO OD MICROMETER 12-18IN/0.001 104-201
Benefit
High DurabilityEasy To Use

Features
Compact and lightweight Longer plunger stroke Carbidecontac t point Large grip Dial indicators and protectioncovers Use Bore Gage Checker to calibrate this unit

Measuring force: 5N following Guide support force: 10N below An vil number: eleven-modified washer number: 4 Wide range accuracy: 2u m Repeat precision: 0.5um Effective stroke of adjacent error 1um gauge head: 1.6mm
Not Available For Sale 0.0 IDR
MITUTOYO SPLINE MICROMETER 0-1IN/0.001 111-166
Benefit
-

Features
-

-
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK CERA SET (46) K 516-394-60
Benefit
Dedicated gauge block sets for micrometer inspection. Sets 516- 106/7/8 and 516-322/3 ar e recommended for checking instrumental errors in micrometers due to the choice of block size sensuring that the instru ment is checked through a full rotation

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate Complete d with wood packaging

Type : Micrometer Inspection Set Size : 1.00, 1.25, 1.50, 2, 3, 5, 10, 15, 20,25 MM, Optical parallel (t = 12 MM) +/- 0.00010 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 50MM 2 611675-041
Benefit
High DurabilityEasy To Use

Features
Includes interchangeable rods for a diversified range ofmeasurement< li>Vernier scale in metric units for taking precise insidedimension (ID) measurementsLocking clamp to hold measuremen ts inplaceSatin ch rome finish helps resist rust and reduc

Gradient Spacing : 0.001INMeasurement Accuracy :+/-0.00104IN Maximum Measurement : 8-40INRange :8-40INResolution : 0.001INSize Name : 8-40IN
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 1.12MM 1 611572-031
Benefit
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are n ot included in the chart below can be supplie d custom-made on request.< li>Each Grade K gauge block to ISO/DIN/

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate

Type : Rectangular Individual Nominal length :10.3 MM-100 MM(.4 5 INC-4 INC) +/- 0.00016 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 1.21MM 1 611581-031
Benefit
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are n ot included in the chart below can be supplie d custom-made on request.< li>Each Grade K gauge block to ISO/DIN/

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate

Type : Rectangular Individual Nominal length 125 MM-1000 MM (5 INC-20 INC) +/- 0.00016 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 1.48MM 1 611608-031
Benefit
Offers a resolution of 0.01 mm with corresponding accuracy. ID measurement value: displayed value + (the minimum inside measurement val uementioned below).OFFSET switch allows to input a compensation valu e so t hat the measurement value can be

Features
Tips of the outside measurement jaw are relieved f or easy measurem ent of thin parts

Type : Absolute Digimatic Caliper Resolution : 0.01 MM Repe atability : None Material : Steel Jaw depth : 150 MM IP rat i ng : IP67 Interface SPC : Yes Range : 0-20 INC/0.01 MM
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 4.5MM 1 611644-031
Benefit
-

Features
-

-
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 7MM 1 611617-031
Benefit
-

Features
-

-
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 8MM 1 611618-031
Benefit
-

Features
-

-
Not Available For Sale 0.0 IDR
MITUTOYO DISK MICROMETER 50- 75/0.01MM 123-115
Benefit
High DurabilityEasy To Use

Features
Tubular Micrometer measures the inside dimensions of cylinders,ring s, and parallel surfaces Vernier scale in metric units fortaking pre cise inside dimension (ID) measurements Adjustablezero-setting helps provide accuracy Satin chrome fini

Part Number : 133-157 Style Name : Vernier MaximumMeasureme nt : 425-450mm Gradient Spacing : 0.01 MM MaterialType : Carbide Measurement Accuracy : +/-0.008mm Number ofItems : 1 Range : 425-450mm Resolution : 0.01 mm
Not Available For Sale 0.0 IDR
MITUTOYO CONTACT POINT 0.7D F/513 190655
Benefit
High DurabilityEasy To Use

Features
Measurement range of each model in series 0 to 200mm, stroke of 12m m, and resolution of up to 0.001mm LCD screen displays in metric Keeps track of the origin point once set for life of the battery (about 3.5 years) for accuracy Includes f

Range/stroke: 0-200mm Graduations: 0.01mm Accuracy of +/-0. 02mm Flatness is 5um Stroke is 12mm Base dimens ions are 101 .6 x 16mm Dial reading: 0.01mm or .001inch Flatnes s of base fac e: 5µm
Not Available For Sale 0.0 IDR
MITUTOYO TUBULAR MICROMETER SET2-12IN(10) 133-904
Benefit
Several unique characteristics

Features
A wide choice is provided to best match the target applications:set s containing from 2 to 112 blocks are available. The wear to a frequentl y used square gauge block set can be drastically reduced byusing tungste n carbide wear blocks on the ends of a
stack. There are two availa ble, of nominal dimension 1mm and 2mm. These blocks are much morewear-re sistant than steel blocks, and they also absorb most of the wearthat wo uld other w ise occur to the blocks in the set due to contact, and there fore
maxi mize the set's longevity. Wear blocks are relativelyin exp ensive and can be readily discarded when no longerserviceable. To a chieve maximum protection, the same face of each wearblock shoul d always be wrung to a set block, so the opposite,
wearing ,face nev er touches a set block.

Type : Square Set Size : 1.005 1.01-1.09 1.1-1.9 1-24 25-10 0 MM +/- 0.00010 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO SETTING RING 2.75MM 177-246
Benefit
Checking instrumental errors in micrometers due to the choice of bl ock sizes ensuring that the instrument is checked through a full rota tion of the spindle over the range 0 25 mm (or 1 In)

Features
Dedicated gauge block sets for micrometer inspection. Sets 516 -106/7/8 and 516-322/3 ar e recommended for checking instrumental erro rs in micrometers due to the choice of block size sensuring that the in strument is checked through a full
rotation of the spindle over thera nge 0-25 mm (or 0-1 In). Sets 516-115/6/7, 516-165/6 and 516-177 c ontain blocks in 25 mm (or 1 In) steps for aiding inspection of larg e micrometers in conjunction with one of the above mentioned sets. Sets
516-580/1/2, 516-390/1/2 are dedicated to the QuantuMike wit h its 2mm/rev spindle feed.

Type : Micrometer Inspection Set Size : 1.00, 1.25, 1.50, 2, 3, 5, 10, 15, 20, 25 MM, Optical parallel (t = 12 MM) +/- 0.00016 M M Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO DIAL SNAP GAGE 100-125MM 201-105
Benefit
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are n ot included in the chart below can be supplie d custom-made on request.< li>Each Grade K gauge block to ISO/DIN/

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate

Type : Rectangular Individual Nominal length :6 MM-10 MM(. 3 IN C-.4 INC) +/- 0.00010 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO DIAL SNAP GAGE 150-175MM 201-107
Benefit
High Quality Product

Features
Fine adjustment carriage to control slider moveme nt for precision measurements Two-way measurement capability for precision measuremen ts of inner dimension (ID) and outer dimension (OD) in both inch and met ric units Long jaws for taking hard

Type : 0.02 MM Accuracy : +/- 0.05 MM Graduation : 0.02 MM Jaw Depth : 200 MM Material : Stainless Steel Maximum Measu rement : 0-30 IN Item Depth : 200 MM Measurement Accuracy : +/- 0.003 IN Overall Length : 1230 MM
Not Available For Sale 0.0 IDR
MITUTOYO DIAL SNAP GAGE 175-200MM 201-108
Benefit
High DurabilityEasy To Use

Features
Inside dimension (ID) measurement capability for making comparison measurements of hole diameters and groove and tube thickness Spring -loaded for point contact at constant measuring pressure Di al disp lay provides precise, readable measurem

Range: 50 - 70 mm Measuring force: 1.1/1.6 N Graduation : 0.01 mm Accuracy: 0.03 mm
Not Available For Sale 0.0 IDR
MITUTOYO FLAT ANVIL 201216
Benefit
Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry.Selecting the best set, or sets, to acquire usually depends on the accuracy required by the target applic ations, the level of convenience desire

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate Complete d with wood packaging

Type : Rectangular Set Size : 1.00051.001-1.0091.01-1.490.5-24. 525-100 MM +/- 0.00010 MM< li> Ceramic Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO CARBIDE POINT/FLAT D8 F/2000 137399
Benefit
High Quality Material From Steel/Ceramic with Suffix Number Co ntain Grad e and Standard Include Inspection Certificate Com pleted with wood packaging

Features
Mitutoyo provides a wide selection of boxed sets of gauge blocks to meet the various needs of industry. Selecting the best set, or sets, to acquire usually depends on the accuracy required by the target appli cations, the level of convenience
desired (larger sets offer more comb ination possibilities) and the environmental conditions in which they wi ll be used.

Type : Rectangular Set Size : 1.0005 1.001-1.009 1.01-1.49 0.5- 24.5 25-100 MM +/- 0.00016 MM< li> Ceramic Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO CONTACT POINT/CERAMIC F/7331 21JZA062
Benefit
High DurabilityEasy To Use

Features
Three-point contacts for self-centering measurement of the inside di mension (ID) of boresVernier scale in metric units for taking precis e inside dimension (ID) measurementsRatchet-stop mechanism helps pro vide uniform pressure for precise, repe

Style Name : VernierMaximum Measurement : 250-275mmGradient Spacing : 0.005 mmMeasurement Accuracy : +/-0.005mmRange : 250-2 75mmResolution : 0.005mmSi ze : 250-275mm
Not Available For Sale 0.0 IDR
MITUTOYO ANVIL/CERAMIC F/7331 21JZA063
Benefit
If using only one length repeatedly, it is a good idea to purchasei ndividual gauge blocks. Nominal sizes which are not included inthe c hart below can be supplied custom-made on request. Each GradeK gaug e block to ISO/DIN/ JIS, BS or ASME sta

Features
High Quality Material From Steel/Ceramic with Suffix NumberCont ain Grade and Standard Include Inspection Certificate

Nominal length:6 MM - 10 MM(.3 INC - .4 INC)
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK STEEL 0.15MM 0 611822-021
Benefit
If using only one length repeatedly, it is a good idea to purchasei ndividual gauge blocks. Nominal sizes which are not included inthe c hart below can be supplied custom-made on request. Each GradeK gaug e block to ISO/DIN/ JIS, BS or ASME sta

Features
High Quality Material From Steel/Ceramic with Suffix NumberCont ain Grade and Standard Include Inspection Certificate

Nominal length:6 MM - 10 MM(.3 INC - .4 INC)
Not Available For Sale 0.0 IDR
MITUTOYO GAUGE BLOCK SQ STEEL 4INC 00 614204-521
Benefit
High Quality Material From Steel/Ceramic with Suffix Number Co ntain Grad e and Standard Include Inspection Certificate

Features
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are not included in th e chart below can be supplie d custom-made on request. Each Grade K gauge block to ISO/DIN/ JIS, BS or
ASME standard is supplied with a Certificate of Calibration which certifies that the gauge block was c alibrated by interferometry.

Type : Rectangular Individual Nominal length : 10.3 MM-100 MM ( .45 INC-4 INC) +/- 0.00010 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO TUBULAR MICROMETER 6-7IN/0.001 133-227
Benefit
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are n ot included in the chart below can be supplie d custom-made on request.< li>Each Grade K gauge block to ISO/DIN/

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate

Type : Rectangular Individual Nominal length :10.3 MM-100 MM(.4 5 INC-4 INC) +/- 0.00010 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO TUBULAR MICROMETER 8-9IN/0.001 133-229
Benefit
If using only one length repeatedly, it is a good idea to purchase individual gauge blocks. Nominal sizes which are n ot included in the chart below can be supplie d custom-made on request.< li>Each Grade K gauge block to ISO/DIN/

Features
High Quality Material From Steel/Ceramic with Suffix Number Con tain Grad e and Standard Include Inspection Certificate

Type : Rectangular Individual Nominal length :10.3 MM-100 MM(.4 5 INC-4 INC) +/- 0.00010 MM Steel Standard : JIS
Not Available For Sale 0.0 IDR
MITUTOYO TUBULAR MICROMETER 300-325/.01MM 133-153
Benefit
If using only one length repeatedly, it is a good idea to purchasei ndividual gauge blocks. Nominal sizes which are not included inthe c hart below can be supplied custom-made on request. Each GradeK gaug e block to ISO/DIN/ JIS, BS or ASME sta

Features
High Quality Material From Steel/Ceramic with Suffix NumberCont ain Grade and Standard Include Inspection Certificate

Nominal length:10.3 MM - 100 MM(.45 INC - 4 INC)
Not Available For Sale 0.0 IDR
MITUTOYO DIG INDICATOR ID-H 0-30.4MM 543-561E
Benefit
-

Features
-

-
Not Available For Sale 0.0 IDR
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.


Masa Depan E-procurement segala Sektor Industri di Indonesia

Ezmaro merupakan e-commerce B2B (business to business) yang menyediakan berbagai kebutuhan untuk bisnis dan industri. Berbagai produk maintenance, repair dan operation industri tersedia dengan lengkap untuk menjamin proses procurement dengan mudah, efisien dan cepat. Tantu saja harga yang tersedia menjadi bagian penting untuk efisiensi perusahaan Anda,karenanya Ezmaro selalu menyejikan harga yang sangat kompetitif di pasar dan menjamin kebutuhanindustri Anda terpenuhi dengan sempurna. Ezmaro menyediakan berbagai kebutuhan abrasive, perlengkapan dan alat pembersih, perkaka tangan, perkakas mesin, perkakas baterai dan pneumatic bersumber angin, komponen mekanikal, selang, mesin-mesin las, mesin serba guna bahan bakar bensin, diesel, kipas angin industrial, mesin las, mesin bubut, mesin teknologi perkayuan dan mesin pengolahan besi. Ezmaro juga menyediakan berbagai alat pengaman (safety) dan alat kesehatan,kebutuhan pengukuran manual dan digital, perlengkapan laboratorium, alat kelistrikan, kebutuhan material handling dan alat angkut manual dan elektrik. Tersedia pula perlengkapan kelistrikan lengkap untuk berbagai kebutuhan proyek. Tersedia hingga 100.000 sku produk dari ribuan merek terkenal di Indonesia yang siap untuk melayani kebutuhan industri Anda dimanapun berada. Kami dilengkapi pulan dengan berbagai fitur penting untuk industri dan kantor, tersedia pembayaran tempo yang menjamin kemudayanan pemesanan berbasisPO (purchase order) dan menjamin pemakaian alat produksi di terima sebelum pembayaran, Ezmaro juga mnyediakan berbagai metode pembayaran moderen dan kartu kredit dalam lebih dari 30 jenis pembayaran, dan dijamin pengiriman tepat waktu dari rekanan potensial kami dari berbagai mode pengiriman baik darat, laut dan udara untuk berbagai jenis berat.


Membangun Indonesia dari Proses Pengadaan MRO yang Transparant

Ezmaro merupakan e-commerce B2B (business to business) yang menyediakan berbagai kebutuhan untuk bisnis dan industri. Berbagai produk maintenance, repair dan operation industri tersedia dengan lengkap untuk menjamin proses procurement dengan mudah, efisien dan cepat. Tantu saja harga yang tersedia menjadi bagian penting untuk efisiensi perusahaan Anda,karenanya Ezmaro selalu menyejikan harga yang sangat kompetitif di pasar dan menjamin kebutuhanindustri Anda terpenuhi dengan sempurna. Ezmaro menyediakan berbagai kebutuhan abrasive, perlengkapan dan alat pembersih, perkaka tangan, perkakas mesin, perkakas baterai dan pneumatic bersumber angin, komponen mekanikal, selang, mesin-mesin las, mesin serba guna bahan bakar bensin, diesel, kipas angin industrial, mesin las, mesin bubut, mesin teknologi perkayuan dan mesin pengolahan besi. Ezmaro juga menyediakan berbagai alat pengaman (safety) dan alat kesehatan,kebutuhan pengukuran manual dan digital, perlengkapan laboratorium, alat kelistrikan, kebutuhan material handling dan alat angkut manual dan elektrik.